Peter new here

All new members, your first post should be an introduction here;
Forum rules
Welcome, these forums are for professional and amateur scientists to discuss matters relating to radiation detection, and to facilitate friendly and honest collaboration. It is a requirement for all members to register using their real names and location. If your name has not already been used, feel free to use it as a login handle, otherwise add your name and location to the bottom of your posts as a default signature. Thanks for cooperating.

BUSINESS REGISTRATIONS
If you have a rad related business and want to post information about your products you may do so in the trading post, providing you first introduce your business formally in the introductions forum and add your business details in the signature sections so it is clear to everyone that your post has a commercial purpose.
ManuelDiaz
Posts: 24
Joined: 03 Sep 2016, 18:11
Location: Germany
Contact:

Re: Peter new here

Post by ManuelDiaz » 13 Oct 2016, 05:28

Peter-1 wrote:Hello Steve,

I am now back home and can also make the difference between the pure lead shield and the additional copper shield test.
What can I use to additional to the copper and how many mm must this be?
Peter
Question Peter, as you´re in Germany too, where did you get your lead and the copper? (If you found any physical store)

User avatar
Steve Dubyk
Posts: 30
Joined: 02 May 2015, 06:25
Contact:

Re: Peter new here

Post by Steve Dubyk » 13 Oct 2016, 08:55

Peter, the most common layered lead castles consist of lead, then lead-free pewter, and copper on the inside. I cannot help you with the optimum thickness of each. My constraints for a lead castle are weight (since I move mine around) and cost - both pewter and copper sheeting is a little expensive. Take a look at the Shielding section of the forum, there is some great information and lead castle designs there!

Steve

User avatar
Peter-1
Posts: 120
Joined: 07 Oct 2016, 01:45
Location: Germany
Contact:

Re: Peter new here

Post by Peter-1 » 14 Oct 2016, 01:40

Hello Manuel,

the Pb and Cu are from a friend long time ago. So at this time I have no idea to get this material.

Peter

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest