Hello from UK

All new members, your first post should be an introduction here;
Forum rules
Welcome, these forums are for professional and amateur scientists to discuss matters relating to radiation detection, and to facilitate friendly and honest collaboration. It is a requirement for all members to register using their real names and location. If your name has not already been used, feel free to use it as a login handle, otherwise add your name and location to the bottom of your posts as a default signature. Thanks for cooperating.

BUSINESS REGISTRATIONS
If you have a rad related business and want to post information about your products you may do so in the trading post, providing you first introduce your business formally in the introductions forum and add your business details in the signature sections so it is clear to everyone that your post has a commercial purpose.
Post Reply
Ivan Brown
Posts: 1
Joined: 25 Oct 2016, 06:40
Contact:

Hello from UK

Post by Ivan Brown » 25 Oct 2016, 07:07

Hello everyone,

Firstly, thank you for my membership of the forum.

A quick introduction, I have an active interest in radiation, radiation monitoring and collecting radioactive minerals. In the last 6 months my interest has stepped up a gear, when I successfully returned a defunct Victoreen 6B CDV 700 to working order, since then I have been building Geiger Counter kits and upgrading a couple of old Geiger counters based detector kits I built over 15 years ago ( an ex Becker GC kit and an ex Maplin electronics kit ).

In a former job covering 18 years of my career, I was an Industrial Radiographer, Radiation Protection Supervisor and Radiologist, using; X-Ray ( 25kV to 420kV ) and Gamma sources ( Cobalt60 and Iridium192 ) and attained PCN level 3 certification in Radiography.

Recently, I have also purchased a couple of Scintillation based monitors.

Through membership of other forums ( CDV 700 and Geiger Counter Enthusiasts ), I looked longingly at getting into Gamma Spectrometry, but it all looked to be a very expensive and complicated route to pursue, that is until I viewed some videos on YouTube and saw how relatively easily this could be done. Having then seen the GS1100A which simplifies connection and the ready availability of MCA software, it put Gamma Spectrometry within my reach. I can't wait for my GS1100A to arrive and i can then start to analyse my collection of active minerals, for their Gamma spectra.

User avatar
Steven Sesselmann
Posts: 704
Joined: 27 Apr 2015, 11:40
Location: Sydney
Contact:

Re: Hello from UK

Post by Steven Sesselmann » 25 Oct 2016, 10:09

Ivan,

Hello and welcome to the forum, your GS-1100A a is already on it's way to the other hemisphere so keep an eye out for it soon.

Best of luck setting up your gamma spectrometry, and please feel free to ask here for help if you need it.

Steven

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests