Active Source Alarm Sensor

This devise is designed for loss prevention of dangerous sources.

Failsafe alarm sensor, detects the presence of a gamma source and goes into alarm if the radiation level falls below a set threshold. Designed to work with back to base alarm systems, but can be customised to work with wifi or cellular network.

If you are the person responsible for the safekeeping of a licensed source you no doubt want to know where it is at all times and especially that it is locked up and out of reach to anyone who might not be aware of the danger. This simple device will give you piece of mind. Designed to integrate with a standard alarm system this device can be mounted anywhere close to a source where radiation levels are above background, it will simply sit there and do nothing as long as the source is present, however if the radiation level was to fall below a given threshold, the devise will go into alarm.

The device can be connected to a loud horn speaker, a monitored alarm system or even wired up to a computer that can trigger an email or a text message.