Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Post by **Marco75** » 24 Dec 2023, 02:01

Goog morning Forum,
I am thinking to buy a new scintillation probe for x-rays and low gamma , let's say less than 50-100 KeV
I am considering LaBr3(CE), Srl2(EU) and NaI(Ti) all with beryllium window and small depth (like 25 x 10 mm or less)

I am able to find clear comparisons at normal or middle energies but I have found nothing that shows the energy resolution for these three crystals in the region of 60kev and below

Anywone has diagrams or numbers to share?

Happy Christmas

Marco/Italy

Post by **luuk** » 24 Dec 2023, 06:50

Hi Marco,
maybe this can help you.
Luuk

Post by **Marco75** » 24 Dec 2023, 19:22

Thanks Luuk!
I will have a look!!

Post by **Rob Tayloe** » 25 Dec 2023, 03:20

On the Maximus Energy web blog one of his early articles was with a 2 mm thick SrI2(Eu) detector. Several spectra are shown with lower energy (e.g. Am241) peaks.

https://maximus.energy/index.php/2020/1 ... -detector/

Post by **Marco75** » 25 Dec 2023, 19:47

that's great thanks Rob!!

Gamma Spectrometry Forum

Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Re: Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Re: Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Re: Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Re: Labr3(ce) vs Srl2(EU) vs NaI for Xrays and very low gamma

Who is online