1 post • Page 1 of 1
Greetings I am working on building a detector using a XP2102. I have most of the pinout worked out except for the anode and dynode 10. Just need some confirmation on the correct pins for the dynode 10 and cathode. The diagram I was able to find was from the 80s and this tube is from 2006. one of the pins goes to a silver strip adjacent to the final dynode and the other connects to a copper tab on the dynode its self. the old wiring diagram suggests that dynode 10 would be on the pin going to the little silver strip. i tried to add an attachment of the two but i couldnt get it to work.
Users browsing this forum: No registered users and 1 guest