How exactly does one remove the end cap on the cable end?
I think my detector is arcing internally.
Scionix 38B57 disassembly
-
Dvanhorn
- Posts: 7
- Joined: 30 Jul 2018, 23:25
Re: Scionix 38B57 disassembly
Figured it out..
I applied gentle heat to the cap only, holding the cylinder to make sure it wasn't too hot, then let it cool.
This fatigued or decomposed the adhesive.
Next clamp the cap ONLY in a vise, and gently rock the tube till the cap separates.
About 1% as hard as I was worried it might be.
Pics for whoever it may help
I applied gentle heat to the cap only, holding the cylinder to make sure it wasn't too hot, then let it cool.
This fatigued or decomposed the adhesive.
Next clamp the cap ONLY in a vise, and gently rock the tube till the cap separates.
About 1% as hard as I was worried it might be.
Pics for whoever it may help
You do not have the required permissions to view the files attached to this post.
-
Dvanhorn
- Posts: 7
- Joined: 30 Jul 2018, 23:25
Re: Scionix 38B57 disassembly
Second pic showing internals
You do not have the required permissions to view the files attached to this post.
