mini CsI(Tl) PMT detector build

Scintillation crystals, PMTs, voltage dividers etc...
Post Reply
Paul McK
Posts: 17
Joined: 08 May 2015, 22:25
Location: South Australia
Contact:

mini CsI(Tl) PMT detector build

Post by Paul McK » 15 Sep 2015, 23:27

Let me share the recent build of this mini detector

I had several 10x10x10mm CsI(Tl) scintillators to experiment with using a PIN diode. Instead I noticed a suitable PMT on ebay and built a mini PMT based detector which seems to work quite well considering. The R5070A PMT is only 46mm long but has a 21diam photocathode, importantly a 300 to 900nm range, 10 stages and is linear focused. I prepared the crystal by lightly sanding the sides then spraying them matt white. The PMT was fitted with a Mu metal shield, the 72M voltage divider + 3 caps was soldered to the socket and then everything covered in heatshrink. The crystal was then attached to the face and wrapped with electrical tape. The completed detector was placed inside a painted (not lightproof) plumbing pipe of a nom 32mm OD. Refer attached pics.

First tests showed a background count of just over 300CPM which seems excellent so far so good. It prefers around 950V and 90% audio gain.

I ran Ra, Cs and Th spectra in a lead castle which seemed to give reasonable results for the type & size of the crystal. Refer the attached pics. The resolution is 8.8% (137Cs) measured by exporting the PRA data to excel.

The purpose of the build was to make a mini detector for a portable geiger counter that gives a better count rate than a geiger tube, I originally tested it with 2 crystals to increase the counts but it works OK with one. It proved to be quite an interesting exercise and 1 of 4 different detectors I built in August.

Paul
Attachments
137Cs 10x10x10.jpg
137Cs 10x10x10.jpg (52.27 KiB) Viewed 1502 times
226Ra 10x10x10.jpg
226Ra 10x10x10.jpg (78.82 KiB) Viewed 1502 times
176Lu 10x10x10.jpg
176Lu 10x10x10.jpg (56.35 KiB) Viewed 1502 times
completed.jpg
completed.jpg (2.11 MiB) Viewed 1502 times
att to R5070 PMT.jpg
att to R5070 PMT.jpg (1.25 MiB) Viewed 1502 times
R5070 PMT.jpg
R5070 PMT.jpg (1.75 MiB) Viewed 1502 times
R5070 PMT with shield.jpg
R5070 PMT with shield.jpg (1.07 MiB) Viewed 1502 times
10x10x10.jpg
10x10x10.jpg (739.81 KiB) Viewed 1502 times

User avatar
Steven Sesselmann
Posts: 613
Joined: 27 Apr 2015, 11:40
Location: Sydney
Contact:

Re: mini CsI(Tl) PMT detector build

Post by Steven Sesselmann » 16 Sep 2015, 15:31

Paul,

Nice little detector, and the spectra look quite respectable too. I too have been playing around with PIN diodes, but so far I havent had much success, your idea of using a small PMT is much more reliable, and becomes a simple plug and play job.

When I eventually get the PIN diodes working I will share how I did it, but for now it's just one of those projects I go back to when I have nothing better to do.

Thanks for sharing.

Steven
Steven Sesselmann | Sydney | Australia | gammaspectacular.com | groundpotential.org | rephopper.com | beejewel.com.au |

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest