Do anybody know where to get SHV PCB-mount connector?

Not radiation detection? Then discuss it here!
Post Reply
User avatar
Madmax
Posts: 20
Joined: 12 Feb 2023, 09:17
Location: Sydney
Contact:

Do anybody know where to get SHV PCB-mount connector?

Post by Madmax » 17 Mar 2024, 21:46

Hi! Do anybody know where can i get this or similar connector? https://antenna-connector.com/products/ ... pcb-mount/
They don't respond. Any ideas will be appreciated.

=====

Max
Regards!
Maxim, ATOM project, Sydney, Australia.

Rob Tayloe
Posts: 110
Joined: 10 Nov 2020, 12:00
Contact:

Re: Do anybody know where to get SHV PCB-mount connector?

Post by Rob Tayloe » 17 Mar 2024, 22:54

In the USA I have obtained SHV and other connectors from Mouser, Pasternack, and Digikey. I do not know of more local sources for down under. Links follow -

https://www.mouser.com/c/connectors/rf- ... series=SHV

https://www.pasternack.com/shv-connectors-category.aspx

https://www.digikey.com/en/products/fil ... QDmIAL5KgA

Rob Tayloe
Posts: 110
Joined: 10 Nov 2020, 12:00
Contact:

Re: Do anybody know where to get SHV PCB-mount connector?

Post by Rob Tayloe » 18 Mar 2024, 01:53

The images for these connectors are more similar to what you seem to be seeking (albeit for BNC). The vendor that you tried is the only thing that I see for a close fit, right angle pcb mount for SHV. I have not used this type nor have I ordered from the linked vendor...

https://uk.rs-online.com/web/p/coaxial- ... rs/1650642
Screenshot 2024-03-17 105126.jpg
Screenshot 2024-03-17 105126.jpg (35.2 KiB) Viewed 928 times

Rob Tayloe
Posts: 110
Joined: 10 Nov 2020, 12:00
Contact:

Re: Do anybody know where to get SHV PCB-mount connector?

Post by Rob Tayloe » 18 Mar 2024, 02:09

Pasternack has a close-fitting right angle SHV connector. Don't know if something similar will work for your application.

https://www.digikey.com/en/products/det ... 8/22042979

https://www.pasternack.com/images/Produ ... E45848.pdf
Screenshot 2024-03-17 110623.jpg
Screenshot 2024-03-17 110623.jpg (29.04 KiB) Viewed 926 times

User avatar
Madmax
Posts: 20
Joined: 12 Feb 2023, 09:17
Location: Sydney
Contact:

Re: Do anybody know where to get SHV PCB-mount connector?

Post by Madmax » 18 Mar 2024, 10:13

I have seen a large choice of panel-mount SHV connectors but not PCB-mount, very sorry about that...
Regards!
Maxim, ATOM project, Sydney, Australia.

jneilson
Posts: 32
Joined: 21 May 2024, 05:08
Location: Oxfordshire, UK
Contact:

Re: Do anybody know where to get SHV PCB-mount connector?

Post by jneilson » 30 May 2024, 03:53

Usually, when I've worked on projects that have SHV connectors wired from a PCB, they've been panel mounted, and have trailing leads going to a header on the PCB.

The only project I remember that had an SHV come off the PCB directly, I recall there were problems due to availability of components. Most components we could get as surface mount to be assembled by the PCB manufacturer, but the SHV was a part we couldn't get like that. I recall the boards came in mostly populated but with blank spaces for the SHVs, and an electrical technician had to add on the SHV connector - and it wasn't as simple as soldering in a through-hole component - I think we had to get panel mount SHVs, connect them to a right-angle bracket to attach to the PCB, and then wire the HV center contact with a little pigtail lead (the chassis would provide the outer grounding connection). I found a picture showing what it looked like:
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest