Hi! Do anybody know where can i get this or similar connector? https://antenna-connector.com/products/ ... pcb-mount/
They don't respond. Any ideas will be appreciated.
=====
Max
Do anybody know where to get SHV PCB-mount connector?
Do anybody know where to get SHV PCB-mount connector?
Regards!
Maxim, ATOM project, Sydney, Australia.
Maxim, ATOM project, Sydney, Australia.
-
- Posts: 132
- Joined: 10 Nov 2020, 12:00
- Contact:
Re: Do anybody know where to get SHV PCB-mount connector?
In the USA I have obtained SHV and other connectors from Mouser, Pasternack, and Digikey. I do not know of more local sources for down under. Links follow -
[broken link removed - Steven]
[ broken link removed - Steven]
https://www.digikey.com/en/products/fil ... QDmIAL5KgA
[broken link removed - Steven]
[ broken link removed - Steven]
https://www.digikey.com/en/products/fil ... QDmIAL5KgA
-
- Posts: 132
- Joined: 10 Nov 2020, 12:00
- Contact:
Re: Do anybody know where to get SHV PCB-mount connector?
The images for these connectors are more similar to what you seem to be seeking (albeit for BNC). The vendor that you tried is the only thing that I see for a close fit, right angle pcb mount for SHV. I have not used this type nor have I ordered from the linked vendor...
https://uk.rs-online.com/web/p/coaxial- ... rs/1650642
https://uk.rs-online.com/web/p/coaxial- ... rs/1650642
-
- Posts: 132
- Joined: 10 Nov 2020, 12:00
- Contact:
Re: Do anybody know where to get SHV PCB-mount connector?
Pasternack has a close-fitting right angle SHV connector. Don't know if something similar will work for your application.
https://www.digikey.com/en/products/det ... 8/22042979
[broken link removed - Steven ]
https://www.digikey.com/en/products/det ... 8/22042979
[broken link removed - Steven ]
Re: Do anybody know where to get SHV PCB-mount connector?
I have seen a large choice of panel-mount SHV connectors but not PCB-mount, very sorry about that...
Regards!
Maxim, ATOM project, Sydney, Australia.
Maxim, ATOM project, Sydney, Australia.
Re: Do anybody know where to get SHV PCB-mount connector?
Usually, when I've worked on projects that have SHV connectors wired from a PCB, they've been panel mounted, and have trailing leads going to a header on the PCB.
The only project I remember that had an SHV come off the PCB directly, I recall there were problems due to availability of components. Most components we could get as surface mount to be assembled by the PCB manufacturer, but the SHV was a part we couldn't get like that. I recall the boards came in mostly populated but with blank spaces for the SHVs, and an electrical technician had to add on the SHV connector - and it wasn't as simple as soldering in a through-hole component - I think we had to get panel mount SHVs, connect them to a right-angle bracket to attach to the PCB, and then wire the HV center contact with a little pigtail lead (the chassis would provide the outer grounding connection). I found a picture showing what it looked like:

The only project I remember that had an SHV come off the PCB directly, I recall there were problems due to availability of components. Most components we could get as surface mount to be assembled by the PCB manufacturer, but the SHV was a part we couldn't get like that. I recall the boards came in mostly populated but with blank spaces for the SHVs, and an electrical technician had to add on the SHV connector - and it wasn't as simple as soldering in a through-hole component - I think we had to get panel mount SHVs, connect them to a right-angle bracket to attach to the PCB, and then wire the HV center contact with a little pigtail lead (the chassis would provide the outer grounding connection). I found a picture showing what it looked like:

Who is online
Users browsing this forum: No registered users and 2 guests