Gamma Spectrometry Forum

Hi! Do anybody know where can i get this or similar connector? https://antenna-connector.com/products/ ... pcb-mount/
They don't respond. Any ideas will be appreciated.

=====

Max

In the USA I have obtained SHV and other connectors from Mouser, Pasternack, and Digikey. I do not know of more local sources for down under. Links follow -

[broken link removed - Steven]

[ broken link removed - Steven]

https://www.digikey.com/en/products/fil ... QDmIAL5KgA

The images for these connectors are more similar to what you seem to be seeking (albeit for BNC). The vendor that you tried is the only thing that I see for a close fit, right angle pcb mount for SHV. I have not used this type nor have I ordered from the linked vendor...

https://uk.rs-online.com/web/p/coaxial- ... rs/1650642

Pasternack has a close-fitting right angle SHV connector. Don't know if something similar will work for your application.

https://www.digikey.com/en/products/det ... 8/22042979

[broken link removed - Steven ]

I have seen a large choice of panel-mount SHV connectors but not PCB-mount, very sorry about that...

Usually, when I've worked on projects that have SHV connectors wired from a PCB, they've been panel mounted, and have trailing leads going to a header on the PCB.

The only project I remember that had an SHV come off the PCB directly, I recall there were problems due to availability of components. Most components we could get as surface mount to be assembled by the PCB manufacturer, but the SHV was a part we couldn't get like that. I recall the boards came in mostly populated but with blank spaces for the SHVs, and an electrical technician had to add on the SHV connector - and it wasn't as simple as soldering in a through-hole component - I think we had to get panel mount SHVs, connect them to a right-angle bracket to attach to the PCB, and then wire the HV center contact with a little pigtail lead (the chassis would provide the outer grounding connection). I found a picture showing what it looked like: