NORM: Triple superphosphate garden fertilizer

Share your spectra and discuss their features here
stamasd
Posts: 124
Joined: 29 Oct 2017, 02:12

NORM: Triple superphosphate garden fertilizer

Post by stamasd » 24 Oct 2026, 22:16

Triple superphosphate is made from treating phosphate rock with phosphoric acid. It is known to contain small amounts of uranium and its daughter products. The phosphoric acid treatment precipitates these and concentrates them in the commercial product.
This was taken from 100g of triple superphosphate fertilizer that came from a bag I purchased at my local gardening store.

Setup:
1. Hardware:
-GS-2020-CSI detector, 2x2in CsI(Tl) crystal
-GS-USB-PRO MCA
-shield: 4cm thick lead castle lined on the inside with 2 layers of 1.5mm each copper sheet
2. Software:
-Artix Linux
-PRA 2.5 running under system wine
3. Settings:
-1300V
-volume 130%
-acquisition time 1800s
4. Calibration:
-5-point slope fit using the peaks of Lu-176(LYSO crystal) at 202 and 307keV; Cs-137 commercial source (662keV); Co-60 commercial source (1173 and 1332keV)
-background radiation (1800s) was subtracted

Result:
You can clearly see peaks at:
-186keV - Ra-226
-242, 295, 352keV - Pb-214
-609, 1238, 1764keV - Bi-214
These are all daughter products of the U-238 decay chain.
triple-phosphate-2inCsI-1300V-130vol-pbcu-1800s.png
You do not have the required permissions to view the files attached to this post.

User avatar
Svilen
Posts: 202
Joined: 23 Sep 2016, 04:25

Re: NORM: Triple superphosphate garden fertilizer

Post by Svilen » 24 Oct 2026, 22:48

I didn't know this about the superphosphate fertilizer, thanks for posting.

User avatar
Sesselmann
Posts: 1408
Joined: 27 Apr 2015, 11:40

Re: NORM: Triple superphosphate garden fertilizer

Post by Sesselmann » 26 Oct 2026, 12:59

Happy to see that your CSI detector is performing so nicely 👍

stamasd
Posts: 124
Joined: 29 Oct 2017, 02:12

Re: NORM: Triple superphosphate garden fertilizer

Post by stamasd » 28 Oct 2026, 08:12

Sesselmann wrote: ↑
26 Oct 2026, 12:59
Happy to see that your CSI detector is performing so nicely 👍
It is. However I had to tweak the settings quite a bit. It came marked from you as "950V" but in my experience it actually needs 1300V to work well. Not a problem though.

User avatar
Sesselmann
Posts: 1408
Joined: 27 Apr 2015, 11:40

Re: NORM: Triple superphosphate garden fertilizer

Post by Sesselmann » 28 Oct 2026, 09:05

stamasd wrote: ↑
28 Oct 2026, 08:12
It is. However I had to tweak the settings quite a bit. It came marked from you as "950V" but in my experience it actually needs 1300V to work well. Not a problem though.
Thats fine, I stopped printing the voltage on the label because it varies between PMT's. Your 1300 V seems quite high, are you struggling to get enough gain?

stamasd
Posts: 124
Joined: 29 Oct 2017, 02:12

Re: NORM: Triple superphosphate garden fertilizer

Post by stamasd » 29 Oct 2026, 02:43

Sesselmann wrote: ↑
28 Oct 2026, 09:05
Thats fine, I stopped printing the voltage on the label because it varies between PMT's. Your 1300 V seems quite high, are you struggling to get enough gain?
Correct. I also have to boost the audio volume in the audio mixer (pavucontrol) to 130%. Seems to work well with those settings.
(and yes, that is with the volume adjustment on the GS-USB-PRO at the maximum)
With that, I get the Cs-137 line at around 25 arb.u in PRA, and the 307keV of Lu-176 at 12 arb.u - seems good to me

Cs-137, uncalibrated:
cs137.png
LYSO, uncalibrated:
LYSO.png
You do not have the required permissions to view the files attached to this post.

User avatar
Sesselmann
Posts: 1408
Joined: 27 Apr 2015, 11:40

Re: NORM: Triple superphosphate garden fertilizer

Post by Sesselmann » 29 Oct 2026, 08:59

stamasd wrote: ↑
29 Oct 2026, 02:43
Correct. I also have to boost the audio volume in the audio mixer (pavucontrol) to 130%. Seems to work well with those settings. (and yes, that is with the volume adjustment on the GS-USB-PRO at the maximum)
Sylviu,

Somewhat strange that your are experiencing low gain.

Does your GS-USB-PRO have a red, black or white PCB ?
If it os the model with a white PCB you need to be careful when turning up the SHP and VOL to 100 percent.
Either one probably okay but both at the same time can kill the opamp, this problem was corrected later on the black and red PCB versions..

Have you tried ImpulseQt ?

Steven

stamasd
Posts: 124
Joined: 29 Oct 2017, 02:12

Re: NORM: Triple superphosphate garden fertilizer

Post by stamasd » 29 Oct 2026, 20:07

I have never opened it so I don't know the color of the PCB. I may do that next week when I will have some time for experiments again, until then I'm all tied up at work all day. Regardless, I haven't touched the SHP adjustment at all, I left it as it was preset. Been using it like this for quite some time with no issue.
I have just managed to make ImpulseQT work (I'm the one who created the recent thread on github) and haven't played with it yet, again no time until next week.