NORM: Lanthanum metal

Share your spectra and discuss their features here
stamasd
Posts: 124
Joined: 29 Oct 2017, 02:12

NORM: Lanthanum metal

Post by stamasd » 30 Oct 2026, 20:05

I have a chunk of 100g lanthanum metal. It is sealed under argon in an aluminum foil bag, because it is reactive and will tarnish quickly with the oxygen in the air. I purchased it a while ago from Aliexpress. Country of origin is China.

This is a 2h spectrum I took of it last night.

Setup:
1. Hardware:
-GS-2020-CSI detector, 2x2in CsI(Tl) crystal
-GS-USB-PRO MCA
-shield: 4cm thick lead castle lined on the inside with 2 layers of 1.5mm each copper sheet
2. Software:
-Artix Linux
-PRA 2.5 running under system wine
3. Settings:
-1300V
-volume 130%
-acquisition time 7200s
4. Calibration:
-5-point slope fit using the peaks of Lu-176(LYSO crystal) at 202 and 307keV; Cs-137 commercial source (662keV); Co-60 commercial source (1173 and 1332keV)
-background radiation (7200s) was subtracted

Result:
The peaks of the naturally occurring La-138 (8.88 e-4 %) are visible:
-788keV
-1435keV, hard to distinguish from the natural K-40 at 1460keV
-there is also a peak visible at 511keV due to the beta+ decay mode of La-138 (and possibly other impurities present)
Also, other peaks can be seen. The ones around 200 and 300keV are likely due to a lutetium impurity (Lu-176).
There are also peaks at:
-around 680keV
-around 900keV
-around 1000keV
-around 1152keV, the most prominent of the minor peaks.
-around 2800keV
Lanthanum-2h-2inCsI-1300V-130vol-pbcu-7200s.png
You do not have the required permissions to view the files attached to this post.