OpenGamma

[Lposter]

OpenGamma is an open source spectrum analyser that I downloaded a while back (https://sourceforge.net/projects/opengamma/).
Documentation is very limited but it seems to do normal spectrum analysis functions (peak analysis, identification, quantification) and can open the usual formats (Ortec standard .chn, Canberras .cnf and IEC standard).

It seems fairly intuitive to use (the usual conventions for software of this type) but to do useful things you need to work with it.

Calibration (for both energy calibration and efficiency) is going to require you to edit the libraries as the ones included wont be of much use to a hobbyist (the isotopes listed wont be available to most). But a library could be populated easily with Cs-137, Ra-226 plus daughters and K-40 and Am-241 which gives a useful spectrum for energy calibration. As I imagine for hobbyist use, efficiency calibration would be tricky given the difficulty and expense in getting hold of calibrated isotope sources but if you were willing to accept a 10% uncertainty or something, it could be done.

Once energy calibration and efficiency calibration information is available, the software seems to do the usual stuff. The libraries are text files and easily edited or amended.

Attached are two spectra I had from a 2x2 inch NaI (1024 channels), one is an old Ra-226 source and the other is a Am-241, C0-60, Cs-137 source I had. The latter I thought I could use to efficiency calibrate the detector as I knew the activities but I couldn't get the calibrations to work - a manual would be handy I guess.

Unless they supplement the thing with a proper manual, Fitzpeaks is probably the better option. But its nice to see free open source programmes being available.

Lars

[pilgrim]

Thank you Lars for your review, very interesting.

[marconmeteo]

I ask for information: is it possible to import the analyzes made with PRA or Theremino into this software? Or do the measurements have to be done directly with OpenGamma? Thanks for any explanation.

Dario

[Lposter]

OpenGamma is not a spectrum acquisition program - it doesnt acquire data. It just analyses spectra acquired by instruments.

Like Fitzpeaks or whatever.

To be fair the spectral formats it opens are fairly limited (4 types -.chn, .iec, .cnf and csv types).

If you cannot acquire spectra in those formats or convert yourself, I recommend CAMBIO Spectrum Converter which converts just about any spectrum type ever made and can do a host of other operations on spectra (rebinning, summing and subtracting, energy calibrations, mathermatical operations on spectra, etc etc.).

You can get it here https://hekili.ca.sandia.gov/Cambio/

(I think its still free). Easy to use, well supported, and as comprehensive s one could hope for.

Lars

[Conor Whyte]

Dead link!

[jneilson]

Dead link!

Updated link for Cambio: https://github.com/sandialabs/cambio/releases

Probably best to scroll down the page and find one of the GUI releases rather than a command-line only one - it's much more intuitive working from the GUI.

[Conor Whyte]

I have been playing around with this new software and it's been quite interesting seeing how this resolves 16K bins from the Red Pitaya based spectroscopy setup I have. It works quite well. One thing that would be interesting is to somehow either use this program on the Redpitaya and be able to do gamma ray spectroscopy directly or use it as a control program like MCPHA does already. It would be a bit of work but the program is already web based so maybe the first option is do-able? hmmm...thinking out loud