My intro

All new members, your first post should be an introduction here;
Forum rules
Welcome, these forums are for professional and amateur scientists to discuss matters relating to radiation detection, and to facilitate friendly and honest collaboration. It is a requirement for all members to register using their real names and location. If your name has not already been used, feel free to use it as a login handle, otherwise add your name and location to the bottom of your posts as a default signature. Thanks for cooperating.

BUSINESS REGISTRATIONS
If you have a rad related business and want to post information about your products you may do so in the trading post, providing you first introduce your business formally in the introductions forum and add your business details in the signature sections so it is clear to everyone that your post has a commercial purpose.
Post Reply
User avatar
Emanuele C.
Posts: 6
Joined: 01 May 2015, 17:01
Contact:

My intro

Post by Emanuele C. » 01 May 2015, 18:13

Hi everybody,
I'm Emanuele from Italy. I'm a mechanical engineer but my spectrum of interest extends to other technical disciplines.
I'm interested in electronics and Arduino, nuclear physics and everithing is related to science and technology.
I would like to greet Tom from iRad where I bought my first gamma scintillator and of course Steve.

My equipment and radioactive samples:
Ludlum model 3 with Bicron NaI(Tl) scintillator (bought from iRad)
Medcom Inspector Alert+ GM (2" pancake)
An old Russian Prypyat GM counter
A self buid Theremino based spectroscopy driver
Gamma Spectacular GS-1100PRO with GS-2812 NaI(Tl) scintillation probe
A lead caste for
My favourite MCA software is Beqmoni but I'm using also Fitzpeaks.

My radioactive samples:
Spark gap tube with Cs137
Some old tubes containing Ra-226
Thorium welding rod and other stuff containing Th-232
Uranium glass
Pure Potassium Chloride (K40)
Tririum betalights
Smoke detector source containing Am-241
Uranium ores..

About gamma spectroscopy I've some ongoing projects that I'll be glad to discuss within this forum:
A 2.5" x 2.5" NaI(Tl) probe from my gamma spectroscopy lab
A solid state radiation detector based on First Sensor X100-7, Arduino and OLED display
A new lead castle for my gamma spectroscopy lab

PS: I've already started some of the above discussion; find it in the old forum.
http://www.gammaspectacular.com/index.p ... t&path=713

Some of my experiments are on:
https://www.youtube.com/channel/UCbIomy ... qEb2xv9GHQ

Best regards to all,
Emanuele

User avatar
Sesselmann
Posts: 940
Joined: 27 Apr 2015, 11:40
Location: Sydney
Contact:

Re: My intro

Post by Sesselmann » 01 May 2015, 19:01

Emanuele,

Welcome to the forum and thanks for the nice intro..

I am interested in your experiments with the first sensor solid state detector, have you found a circuit that works?

I bought some X-100-7 as well, but have not had much success with my circuits, so would love to discuss this in teh hardware forum.

Steven

User avatar
iRad
Posts: 174
Joined: 01 May 2015, 12:27
Location: Stuart, FL USA
Contact:

Re: My intro

Post by iRad » 03 May 2015, 12:41

Hi Emanuele,
Great to see you here!
Cheers, Tom Hall / IRAD INC / Stuart, FL USA
Please check out my eBay Store: http://stores.ebay.com/The-Rad-Lab

User avatar
Emanuele C.
Posts: 6
Joined: 01 May 2015, 17:01
Contact:

Re: My intro

Post by Emanuele C. » 14 Aug 2015, 02:06

Dear Steven,
sorry for my late answer but unfortunately I haven't so much time for my hobbies.
About my Geiger counter I have done some step forward with HW/SW (..I should say radiation detector since there is not GM tube..).
I will post some picture in the hardware forum.

Regards,
Emanuele

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest