When I was reading on the radioactive elements in coal (see my separate anthracite thread) I cam across an interesting study that was tracing back the origins of NORM present in industrial steel back to the raw materials used to make it: coal, coke, iron ore, fluxes etc. That study found that NORM exists in coal and so on, but surprisingly iron ore - depending on origin - can have NORM concentrations sometimes up to 1-2 orders of magnitude higher that coal. I decided to take a look at that.
I don't have iron ore. What I do have is a bag of natural iron oxide sold to be used as a pigment for paint. I bought it years ago from Amazon, sold by a chemical company. I have no idea where it originates from, i.e. where in the world it was mined. The bag mentions that the iron oxide concentration is 82%, which is very high for a natural iron oxide. I assume that it underwent some washing/concentration steps. It is a very fine powder. I took 100g of the material, put it in a plastic box and ran it for 6h.
Setup:
1. Hardware:
-GS-2020-CSI detector, 2x2in CsI(Tl) crystal
-GS-USB-PRO MCA
-shield: 4cm thick lead castle lined on the inside with 2 layers of 1.5mm each copper sheet
2. Software:
-Artix Linux
-PRA 2.5 running under system wine
3. Settings:
-1300V
-volume 130%
-acquisition time 21600s = 6hs
4. Calibration:
-5-point slope fit using the peaks of Lu-176(LYSO crystal) at 202 and 307keV; Cs-137 commercial source (662keV); Co-60 commercial source (1173 and 1332keV
-background radiation (21600s = 6h) was subtracted
Results:
Clearly present are peaks of Ra-226 (194keV), Pb-214 (242, 295 and 352keV) and Bi-214 (609keV). Indeed, decay products of U-238.
(ugh, I tried to attach the picture but the submission form keeps returning an error)
NORM: iron oxide pigment
-
stamasd
- Posts: 124
- Joined: 29 Oct 2017, 02:12
Re: NORM: iron oxide pigment
Trying again to attach the picture to a new message.
Seems it worked this time
Seems it worked this time
You do not have the required permissions to view the files attached to this post.
-
Svilen
- Posts: 202
- Joined: 23 Sep 2016, 04:25
Re: NORM: iron oxide pigment
You’re good at finding unusual sources, I appreciate that! :)
Maybe you could also show a logarithmic view of the spectrograms you share - it’s sometimes easier to look at, since it’s less “hairy.” ;)
Maybe you could also show a logarithmic view of the spectrograms you share - it’s sometimes easier to look at, since it’s less “hairy.” ;)
-
stamasd
- Posts: 124
- Joined: 29 Oct 2017, 02:12
Re: NORM: iron oxide pigment
Sure. Here is the same as above in log scale.
As for finding new sources... this was kinda the last trick I have, at least for now. I'm out of ideas. Been waiting for several weeks for rain, but it's been very dry... some rainwater would be next but after that I don't know.
As for finding new sources... this was kinda the last trick I have, at least for now. I'm out of ideas. Been waiting for several weeks for rain, but it's been very dry... some rainwater would be next but after that I don't know.
You do not have the required permissions to view the files attached to this post.
-
Svilen
- Posts: 202
- Joined: 23 Sep 2016, 04:25
Re: NORM: iron oxide pigment
Well, it seems I was quite wrong on getting it less hairy that way :D
-
stamasd
- Posts: 124
- Joined: 29 Oct 2017, 02:12
Re: NORM: iron oxide pigment
:)
Also, I got another idea for something to test... I'll post it in another day or two if it pans out. Don't hold your breath, it's not going to be something very exciting.
Also, I got another idea for something to test... I'll post it in another day or two if it pans out. Don't hold your breath, it's not going to be something very exciting.